AirPods Pro Microphone Issues on Windows 10: Here Are the Fixes

Numerous users are facing issues on their AirPods Pro while using Windows 10. There are several reasons behind this issue, such as outdated drivers or firmware. So, if you want to repair this annoying issue, you need to pursue this article. Here is the complete procedure mentioned below.

Update Windows or Drivers of the System and Firmware of the AirPods

To update Windows or drivers of the system and firmware of the AirPods, pursue these on-screen step by step points provided below:

1. Firstly, update your driver and Windows of the PC. Keep in mind no optional update is pending uninstall.
2. Also, in case you are utilizing an OEM tool, then utilize it to update your drivers.
3. Once updated, check whether the AirPods mic is operating well. In case the problem continues, then place the AirPods in their situation, show the case close to the iPhone, then launch the lid of the case and shut the notification over the iPhone.
4. Now, update the firmware of the AirPods inside the settings of the iPhone and then choose General.
5. Later, click on the About option and then pick the ‘AirPods’ option.
6. Then select the ‘Firmware Version’ option.
7. Finally, once I updated the AirPods firmware, check whether the AirPods mic is removed from the problem.

Re-add the AirPods Pro to the Device

To re-add the AirPods Pro to the device, pursue these on-screen step by step points provided below:

1. Put the AirPods in the charging case and press the pairing button of the case.
2. Then, without leaving the pairing button, launch the lid of the AirPods case and wait until you see the green color light.
3. After that, leave the pairing button, and over the Windows 10 PC, hold the Windows button.
4. You should input ‘Bluetooth and Other Devices Settings’ into it and hit the Enter button to open the ‘Add Bluetooth or Other Device’ option.
5. Thereafter, select the headset, and once paired with the devices successfully, right-click on your Sound icon.
6. Then pick the Sounds option and reach the Recording tab, then choose it.
7. Later, select the ‘AirPods Pro Stereo’ option, right-click on it, then pick the ‘Default Device’ option.
8. Finally, redo the exact in the Playback button and check the issue.

Modify the Settings of Application

To modify the settings of the application, pursue these on-screen step by step points provided below:

1. Open the Zoom Settings, then reach the ‘Audio’ option and select it.
2. Then extend the pull-down menu of the Speaker and pick the ‘Headset AirPod’ option.
3. You should extend the Microphone pull-down menu and pick the ‘Headset AirPod’ option.
4. Finally, reopen the app and check whether it’s operating well.

Perform the In-Built Troubleshooters

To perform the in-built troubleshooters, pursue these on-screen step by step points provided below:

1. Hold the Windows button to invoke the menu.
2. Then choose the Settings option.
3. You should pick the ‘Update & Security’ option, reach the ‘Troubleshoot’ option, and then select it.
4. Reach the right-side panel, launch the ‘Additional Troubleshooters’ option, and hit the Bluetooth option to extend it.
5. Later, select the ‘Run the Troubleshooter’ option and allow its procedure to finish.
6. Later, apply the troubleshooter recommendation and check the issue.
7. In case the problem continues, then perform the ‘Recording Audio’ troubleshooter and check the issue.

Utilize the Hands-Free Mode

To utilize the Hands-free mode, pursue these on-screen step by step points provided below:

1. Hit on the Sound icon in the system tray.
2. Then pick the ‘Headset (AirPods Hands-Free AG Audio)’ option, then check the issue.
3. In case the problem continues, select Windows and right-click on it, then pick the Device Manager option.
4. Later, extend the ‘Sound, Video, And Game Controllers’ option and right-click over the AirPods Stereo.
5. Choose the Disable Device option and verify to turn off the AirPods Stereo device.
6. Later, shut the ‘Device Manager’ option and restart the system.
7. Once rebooted, check the issue.

Visit: 123.hp.com/setup

Source:https://123hpsetup.linkmyroku.com/airpods-pro-microphone-issues-on-windows-10-here-are-the-fixes/

How to Know Whether Windows Firewall is Preventing a Program or Port

Windows firewall is a perfect utility for preventing potential security threats and spiteful connections on your computer. It is an intelligent and highly versatile utility for protecting your computer against countless online dangers. Do you know that a Windows firewall can also block a particular program, website, or Port to secure your PC?

That’s indeed true, and it helps your computer to stay healthy and risk-free.

Even though a firewall is a security assistant, it can sometimes block websites, ports, or apps on your PC that you may need. If you are also dealing with the same problem and unable to access a required app or Port, check if the firewall is interfering with it.

If you cannot open a particular website, application, or Port, this can happen due to firewall settings. By manipulating the firewall settings on your Windows 10 computer, you might be able to unblock the program.

If the window recognizes any item as suspicious or dangerous, it will automatically prevent it from running. Please read the below instructions for troubleshooting Windows firewall settings.

Easy ways to tell if Windows Firewall has stopped an app

There are basically two techniques of identifying blocked applications by the firewall.

Using firewall settings

The firewall settings can let you see which apps are affected by the firewall protection. You will be able to see if the firewall is currently interfering with any application or website. The below steps will help you access firewall configurations on your PC:

1. First of all, you have to navigate to the control panel.
2. To do so, search for the control panel into the Cortana search bar, located on the taskbar of your computer screen.
3. Once you are inside the control panel application, find your way to system and security.
4. Move downwards on your screen and find the administrative tools option.
5. Click on it, and it will take you to the administrative tools.
6. Navigate to ‘Windows Defender Firewall with advanced security.’
7. From the top menu, select the action button.
8. Click on properties from the dropdown.
9. Select a profile from the top tabs.
10. Look at the logging section.
11. Press the customize icon located next to it.
12. Make sure the ‘log dropped packets’ option is configured as yes.
13. Click on the name and just add ‘pfirewall.log’ into the existing name. Remember, you don’t have to remove the previous name.
14. On the bottom of the window, you can see the log file destination on your computer. Please remember it as you will need to navigate to the log file.
15. Click on the ok button given below in the window.
16. This will save all your settings.
17. Now navigate to the log file location in the file manager.
18. Open the pfirewall.log file that you created.
19. Check if the firewall is blocking any application or other item on your device.
20. This is how you can see all blocked programs on your computer by firewall.

Using Command Prompt

You can also execute a command using the command prompt application on your computer to find if any application is affected due to the firewall. Please consider the following instructions to make this work:

1. First of all, navigate to the command prompt on your computer and make sure you open it as an administrator. Opening it as an Admin is very simple as you only have to search for it in the start menu, then right-click, and choose run as administrator.
2. After that, enter the below command and tap the enter key.
   1. netsh firewall show state
3. Now you will see all blocked items by the Windows firewall on your screen. Check if any required application for Port is blocked.

How to enable a blocked app on a Windows firewall?

If you wish to disable firewall protection for a particular application, and strip off all control of the Windows firewall from it, follow the below instructions:

1. Navigate to the start menu and then search for the control panel.
2. Double-click the control panel icon to open it and then go to system and security.
3. Navigate to windows defender firewall.
4. Click on ‘allow an app or feature through windows defender firewall.’
5. Look for the application that you wish to allow.
6. If the application’s checkbox is marked, it means it is already enabled.
7. If you find it disabled, enable it using the ‘allow another app’ option from the bottom.
8. Follow the instructions provided on your screen.

This is how you allow any application through the Windows firewall. We hope you now have complete knowledge regarding how to check if the Windows firewall deactivates any application.

Visit: 123.hp.com/setup

Source: https://hp123comsetup.wordpress.com/2021/09/06/how-to-know-whether-windows-firewall-is-preventing-a-program-or-port/

Solutions to 7 Common HP Printer Errors

 HP printers stand for both reliability and quality that several other printers fail to offer. Even though HP printers are excellent, they may often disappoint their users by displaying an error code. We have prepared the list of seven common error codes that generally occur on an HP printer and have discussed the solutions to these errors. By following the instructions mentioned below, anyone can quickly get rid of several HP printer error codes. Let’s get started and learn how to fix HP printer error codes.

What Causes the Appearance of an Error Code on HP Printers?

The appearance of an error code is when your printer is not working well or has any fault. The appearance of an error code is the indication that your printer has something wrong with it. The earlier you pay attention to the error code, the better it is. We have discussed seven common HP printer error codes and their effective solutions. Read below and learn ways to get rid of them.

Solutions to Rectify HP Printer Error Codes

We have discussed ways to resolve several error codes on HP printers. If you ever face any error code on your HP printer, trying out the methods below will help you fix them quickly. Read below.

Clear HP Printer Error Code

To get rid of the error code on an HP printer, you need to follow the steps:

1. First, turn on your HP printer.
2. Now, wait until you see it in stationary mode.
3. When the printer is on, suddenly unplug the power cord from the printer.
4. Apart from this, detach the power cables from the wall outlet.
5. Wait for at least 2 minutes.
6. Leave your HP printer disconnected from any power supply.
7. After at least two minutes, reconnect the printer to the power supply.
8. Turn it on and then start printing documents.
9. The procedure explained above will assist HP printer users in fixing several common error codes.

Fix the “Warming Up” Error Message

As an HP printer user, you can see the “Warming Up” error message on your printer. Below is how you can fix it quickly. Follow the instructions:

1. First, connect your computer to the internet, go to the Canon Drivers page, download and update the printer drivers.
2. After updating the printer drivers, you have to change the USB cable.
3. Turn your HP printer off, and then turn it back on.
4. Doing the process will make the error message disappear on your HP printer.
5. If the error message still appears, there may be a hardware issue.

Clear the “Paper Out” Error Message

It is a common error message on several HP printer models. If you ever see the “Paper Out” error message on your HP printer, follow the steps given below:

1. Open the paper tray and check if it is empty.
2. If it is empty, you need to fill it with some paper sheets. 
3. If the paper tray is not empty, there may be an issue with the paper sensor.
4. Make sure the paper sensor is clean.
5. Try printing a page and see if the error code has disappeared.

Fix the Data Transfer Error

If the connection between your HP printer and computer is not proper, you may face a data transfer problem. To fix the issue, follow the instructions:

1. If the connection between the HP printer and computer is not proper, you need to check if USB cables are fine.
2. Check if you have connected the USB cables correctly.
3. Check the IP settings also and make sure that everything matches correctly.
4. In some cases, the error code can be erased by pressing the “Select” button, but doing so may erase the print data also.

Fix the Error Code 22 on HP Printer

The occurrence of error code 22 is when there is a communication issue between your HP printer and computer. To fix the error, you need to follow the steps:

1. To fix the error, plug the printer into different ports and see if it works.
2. If it does not work, replace the cable with a new one.
3. If the error code does not disappear, there may be a hardware problem.

Note: The error code 22 indicates a communication problem between your HP printer and computer. If the method above does not fix it, we ask you to call an HP printer expert. They will rectify the printer issue for you.

Fix the Printer Device Error

To clear the printer device error on your HP printer, one can follow the steps given below:

1. The first thing an HP printer user needs to do is make sure that the paper tray is in the right position.
2. Reinstall the staple stacker.
3. Ensure that the printer configuration is correct.
4. Finally, perform the reset process as explained in the first method above.
5. The steps, if put into action correctly, will fix the error.

Fix the Error Code 59 on an HP printer

To fix the error code 59, one can follow these instructions:

1. The motor error may be related to either the fuser motor, the main motor, and the image drum motor. You need to reset your HP printer to fix the error.
2. If the error persists, you can contact a printer expert to get the issue resolved.

Conclusion

HP printers are suitable for both home and office use. Some may often frown at the HP printers due to error codes. In the article, we have explained the ideal solutions to eight HP printer errors. We hope you find the article of great help.

Meta Description

Eliminate HP printer errors by putting the steps given in this blog post into action. To learn more ways to fix HP printer errors, check out the blog now. 

Visit: 123.hp.com/setup

Source:https://luzelectronicsandtechnology.wordpress.com/2021/07/07/solutions-to-7-common-hp-printer-errors/

123.hp.com/setup - Download HP Printer Softwares and Install Drivers

123.hp.com/setup - Download HP Printer Softwares and Install Drivers

The HP wireless printer is known for easy installing and provides clear documents. Print, copy and scan with one compact device that fits neatly into small office spaces. In addition, HP Printers offers affordable and reliable printers for users. To get the easy installation setup directions, you can visit the official HP printer website: 123.hp.com/setup.

How to Auto Setup the HP Wireless Printer with Wi-Fi Network

To auto-setup the HP wireless printer with a Wi-Fi network, follow these on-screen step by step point mentioned below:

1. Firstly, launch your favorite browser and go to the HP official website: 123.hp.com/setup.
2. Once you reach there, find the HP printer driver via the model number or serial number and then download it.
3. Once the printer driver is downloaded, you can install it properly by following the directions.
4. You should switch on the HP printer.
5. Then, choose the ‘Network (Ethernet/Wireless)’ option while setting up the HP printer.
6. Afterward, hit the “Yes, send my wireless settings to the printer (recommended)” option.
7. Later, wait for the HP printer to get attached to the Wireless network.
8. After finishing the setup process, reboot the system for the correct working of your printer. In case you are still cannot find any issue regarding the HP wireless printer setup, contact the customer care service.

How to Setup the HP Wireless Printer Manually

To manually set up your HP wireless printer, pursue these on-screen step by step point mentioned below:

1. You have to ensure that the HP printer is installed on the desktop. In many cases, all you require to do is connect the HP printer through the USB cord to the desktop and need it to install its program, although several printers also have HP installation CDs.
2. After that, switch on the wireless printer, check the HP printer to connect the power socket and press the Power button.
3. In case you have a non-touchscreen wireless printer, then the printer program setup procedure will need you to attach the HP printer to the wireless network.
4. In case the HP printer is installed already, then the HP printer may require to be uninstalled and reinstalled to be attached to the Wi-Fi network.
5. You should pick the option of Setup and move down to locate the Setup Option, then choose ‘click on Wireless option.’
6. Go to the Network option and click on it.
7. You have to pick the option of ‘Wireless Network Wizard.’
8. Later, choose the ‘SSID network name.’
9. Finally, input the password of the wireless network and hit the Done button.

How to Setup the Wireless Printer with Windows 10

To set up the wireless printer with Windows 10, follow these on-screen step by step point mentioned below:

1. First and foremost, reach the Windows search tool on the Windows 10 PC.
2. Then insert ‘Printer’ into it and hit the Enter key to open the ‘Printers and Scanners’ screen.
3. After that, switch on the HP wireless printer.
4. I prefer the above-explained manual connectivity process and select the ‘Add a printer or Scanner’ option.
5. Now, the HP printer will appear inside the list.
6. Lastly, hit the ‘Add Device’ button, and the HP printer will attach to your Windows 10 system.

How to Find the Printer

To find the printer, follow these on-screen step by step point mentioned below:

1. Hold the Win and Q hotkeys simultaneously over the keyboard to get the Windows search bar.
2. Once you get it, insert ‘printer’ into it and press the Enter button to open the ‘Printers & Scanners’ screen.
3. Once it invokes, click on the ‘Add a printer or scanner option.
4. You should click on ‘The printer that I want isn’t listed.’
5. Go to the ‘Add a Bluetooth, wireless or network discoverable printer’ option and click on it.
6. Now, pick the attached printer.

How to Modify the Default Printer

To change the standard printer, follow these on-screen step by step point mentioned below:

1. Hold the Win and Q hotkeys simultaneously over the keyboard to get the Windows search bar.
2. Once it is invoked, insert ‘printer’ into it and press the Enter key.
3. After invoking the ‘Printers & Scanners’ window, switch the “Let Windows manage my default printer” toggle to disable it.
4. Later, pick the printer you would like to set as standard through the devices list.
5. Now, click on the Manage option.
6. Finally, go to the ‘Set as a default’ option and hit on it.